B BountyHunter Well-Known Member LRH Supporter Joined Jun 13, 2007 Messages 5,718 Location Wilmington NC Jun 9, 2019 #1 This is the best video and explanation of Bolt timing and primary extraction I have seen, especially for Rem 700s.
This is the best video and explanation of Bolt timing and primary extraction I have seen, especially for Rem 700s.
Dave in WI Well-Known Member LRH Supporter Joined Aug 28, 2017 Messages 355 Jun 10, 2019 #2 So, is there a recommended minimum amount of travel measurement from the time bolt touches cam to full bolt rotation?
So, is there a recommended minimum amount of travel measurement from the time bolt touches cam to full bolt rotation?
Alex Wheeler Well-Known Member Joined Jul 5, 2017 Messages 1,669 Location Montana Jun 11, 2019 #3 You can get about .100" of PE out of a remington after you time it. Anything above .050" should be reliable unless your extractor is sloppy. If your running a case with very little taper, you may like a little more.
You can get about .100" of PE out of a remington after you time it. Anything above .050" should be reliable unless your extractor is sloppy. If your running a case with very little taper, you may like a little more.
E Edd Well-Known Member Joined Jan 26, 2011 Messages 3,814 Location Tulsa Jun 15, 2019 #4 Alex, do you ever recut the extraction cam on the receiver?