10/22 accuracy

jmeier1981

Well-Known Member
Joined
Dec 28, 2007
Messages
100
Ive got an older model 10/22 probably mid to early 80s that I put a Volquartsen Carbon Fiber THM barrel on with the 32 hole comp., a Volquartsen trigger group, a archangel deluxe target stock to free float the barrel and an 18x scope and Im just not real happy with the accuracy.

Ive tried about a dozen different loads and had the best luck with Fiocchi Biathalon Match ammo and Ive got a couple 5-shot groups that I was happy with but most are not what I consider acceptable. Im shooting out of a long building so the first 20 of the 50yds Im shooting is completely wind free and Im shooting off of a table, tried a bipod and rear bag, front and rear bags, and a leadsled... Maybe Im expecting to much from a semi auto rimfire but at 50yds I was hoping for a five shot group to have all the bullets touching, and preferably more of a wallowed out hole maybe .40 diameter. Most of my groups are inside the 1" square of the sight in targget but scattered all over inside of the 1" square... the thing that gets me is that my dads old Hawthorne bolt action will shoot with this thing all day and for the most part probably out shoot it and thats just a 9x scope. I guess I was hoping for closer to 1" at 100yds not just 50yds... am I expecting way too much out of this little rifle or is there something else I can do to help it out?
Ive been throwing around the idea of scraping the Volquartsen barrel and putting a 21" clark barrel on it instead, they come with a 5-shot 100yds 1" accuracy guarantee and I know this barrel, or gun for that matter wont touch 1" at 100yds as of now
 
Ive got an older model 10/22 probably mid to early 80s that I put a Volquartsen Carbon Fiber THM barrel on with the 32 hole comp., a Volquartsen trigger group, a archangel deluxe target stock to free float the barrel and an 18x scope and Im just not real happy with the accuracy.

Ive tried about a dozen different loads and had the best luck with Fiocchi Biathalon Match ammo and Ive got a couple 5-shot groups that I was happy with but most are not what I consider acceptable. Im shooting out of a long building so the first 20 of the 50yds Im shooting is completely wind free and Im shooting off of a table, tried a bipod and rear bag, front and rear bags, and a leadsled... Maybe Im expecting to much from a semi auto rimfire but at 50yds I was hoping for a five shot group to have all the bullets touching, and preferably more of a wallowed out hole maybe .40 diameter. Most of my groups are inside the 1" square of the sight in targget but scattered all over inside of the 1" square... the thing that gets me is that my dads old Hawthorne bolt action will shoot with this thing all day and for the most part probably out shoot it and thats just a 9x scope. I guess I was hoping for closer to 1" at 100yds not just 50yds... am I expecting way too much out of this little rifle or is there something else I can do to help it out?
Ive been throwing around the idea of scraping the Volquartsen barrel and putting a 21" clark barrel on it instead, they come with a 5-shot 100yds 1" accuracy guarantee and I know this barrel, or gun for that matter wont touch 1" at 100yds as of now


Believe it or not. I've had great luck with bulk American Eagle through my match barrel. We were shooting golf balls at 100 yards with it last Friday after sighting in a new scope. Granted my barrel is not a Volquartsen, but the AE might be worth a try if you haven't done so already.
 
My 30 year old 12/22 that t totally stock does 1in groups at 100 yards if I do my part, not fantastic, but considering that I rarely shoot it more than 50 yards, more than adequate for what I need
 
I built a 10-22 with a Volquartsen SS fluted barrel a few years back in a laminated thumbole stock. I used the dime sized little orange stickers for targets. That rifle would literly put 10 shots into a raged hole on a dime sized sticker almost every time 50 yards. It was not picky about ammo either, however I did use match grade ammo. So I dont feel you are getting what you shoud from your rifle if you are doing your part as a shooter.

Now before you scrap the barrel, change the scope. I have had 17's with no recoil at all shoot like crap from a cheap scope. It can be shocking what a good scope will do for a rifle. Also, watch out for parralax too.

Jeff
 
Believe it or not. I've had great luck with bulk American Eagle through my match barrel. We were shooting golf balls at 100 yards with it last Friday after sighting in a new scope. Granted my barrel is not a Volquartsen, but the AE might be worth a try if you haven't done so already.


I really dont think its an ammo issue, like I said Ive shot a lot of different stuff through it from winchester super x bulk ammo to CCI Green Tags, Federal Ultramatch, Fiocchi Biathalon Match and like 10 others and Im sure Im doing my part so I dont know what to think...
Ive sent a few emails to Volquartsen and havent gotten a reply yet, so I dont know if theyre just that busy or just not willing to give me there time. but to say Im a little frusterated is an understatement. Ive put almost $700 into this build on top of the stock 10/22 itself that I already had laying around and it doesnt shoot ANY better than it did as a 20-30yr old stock rifle
 
I have done several 10/22 all had either a whistle pig barrel or a green mountain.
All like the american eagle ammo
Rim fires are picky animals some need a device under the barrel If I rember right the they are called bung tuners
You should be able to hold under a inch at 100 yars but your not going to get a one holer from a 10/22
Look to rimfire central.com lots of great 10/22 info there
retiredcpo
 
I built one two or three years ago that I hardly used, I've been selling it in parts lol :D. I had a Butler Creek ss fluted tri-port on it, and average group at 50 yds. (with CCI Green Tag) was 0.3-0.4" (for 5 shots), and 1-1.25" at 100 yds. (if there was no wind and I did my part (the factory trigger was horrible)! I had glass bedded the stock and put a foam pressure pad under the end of the barrel.
 
i've been accurizing 10-22's for 20 yrs now and what i've learned from all my testing is that you shouldn't float a 10-22 barrel. the receiver is just too flexible to support a floated, non supported barrel. i have wittnessed huge gains in accuracy if the entire barrel channel is bedded along with the receiver. the archangel stock you have is the culprit. i know they look awesome, but a fully bedded birch o.e.m stock with blow it away on the bench. sell your current stock and buy a bell and carlson odessey and bed the barrel along with the receiver and you will never look back.
 
Ive got an older model 10/22 probably mid to early 80s that I put a Volquartsen Carbon Fiber THM barrel on with the 32 hole comp., a Volquartsen trigger group, a archangel deluxe target stock to free float the barrel and an 18x scope and Im just not real happy with the accuracy.

Ive tried about a dozen different loads and had the best luck with Fiocchi Biathalon Match ammo and Ive got a couple 5-shot groups that I was happy with but most are not what I consider acceptable. Im shooting out of a long building so the first 20 of the 50yds Im shooting is completely wind free and Im shooting off of a table, tried a bipod and rear bag, front and rear bags, and a leadsled... Maybe Im expecting to much from a semi auto rimfire but at 50yds I was hoping for a five shot group to have all the bullets touching, and preferably more of a wallowed out hole maybe .40 diameter. Most of my groups are inside the 1" square of the sight in targget but scattered all over inside of the 1" square... the thing that gets me is that my dads old Hawthorne bolt action will shoot with this thing all day and for the most part probably out shoot it and thats just a 9x scope. I guess I was hoping for closer to 1" at 100yds not just 50yds... am I expecting way too much out of this little rifle or is there something else I can do to help it out?
Ive been throwing around the idea of scraping the Volquartsen barrel and putting a 21" clark barrel on it instead, they come with a 5-shot 100yds 1" accuracy guarantee and I know this barrel, or gun for that matter wont touch 1" at 100yds as of now

If your serious about rebarreling, Lija sells a nice drop in for them. But I also think the stock may be in need of some work. Are your groups for 50 yards or 100 yards?
gary
 
I shot a few 100yd groups Sunday and didn't even bother measuring them... all 10shot groups were fist sized it was kind of embarassing, my 600yd .223 groups are better
 
So many things it could be. Maybe a small nick in the crown? Could be optics. those would be the first two thing I would address. I have seen em floated and shoot bugholes. Get that crown under some good magnification and tell us what you see. Take a pic and let us see if you ate not sure.
 
with a 22 rimfire, they can be very selective about the ammunition being used. So one of the first things you need to do is to beg borrow or steal a few rounds from all your buddies till you happen find something that seems consistently better. I have had some rimfires that wouldn't shoot the high dollars stuff worth a ****, but in turn would shoot the cheap stuff like it was target stuff. Also you can have two identical rimfires, and they'll often prefer different ammo!

Back to the 10-22, the reciever will flex all over the place with a heavy weight out front. I've seen a couple of them that had the barrel fully bedded with the reciever group fully floated. If you are seriously into that concept of a rifle, then keep a close eye out for an AMT clone at the gun shows. Much better rifle with a better reciever group made of steel. Another thing to remember is what your working with. They're good reliable rifles, but your never gonna make it shoot like a 541, CZ, or a Cooper, no matter how much money you sink into it. It took me awhile to get that into my head with a 39M I fought with for years. After shooting 1.38" groups at 100 yards with a couple 39A's I thought the M would as well.
gary
 
i've been accurizing 10-22's for 20 yrs now and what i've learned from all my testing is that you shouldn't float a 10-22 barrel. the receiver is just too flexible to support a floated, non supported barrel. i have wittnessed huge gains in accuracy if the entire barrel channel is bedded along with the receiver. the archangel stock you have is the culprit. i know they look awesome, but a fully bedded birch o.e.m stock with blow it away on the bench. sell your current stock and buy a bell and carlson odessey and bed the barrel along with the receiver and you will never look back.

Plus one on that. I'd also check the torque of the wedge block that secures the barrel to the receiver. Even torque on both fasteners is more important.

I use the good old snot stock on mine, fully bedded with Agulia Hyper velocity rounds.

Fun little cheap to shoot rifle and darn accurate.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top