Recent content by SheepShapeAK

  1. SheepShapeAK

    375 EnABELR Build

    Lazers in 400 and 425 are working well for me with my 8 twist. Pushing the badlands 365’s like 2950 and getting 1/4 MOA groups at 300. Still haven’t had time to get out and stretch the legs.
  2. SheepShapeAK

    375 EnABELR Build

    I want to put a tuner behind my suppressor on the next barrel. Not sure the science is settled on structured barrels.
  3. SheepShapeAK

    375 EnABELR Build

    I wasn’t able to PM you for some reason. This is the print from my JGS reamer. There was no difference from what I saw with the Manson. With that said, the peterson brass is a lot smaller than the reamer. I am considering having another reamer made that takes .004 off the body and neck. I'd...
  4. SheepShapeAK

    SOLD/EXPIRED Lapua 6.5 PRC Brass

    Two have been sold. **Two boxes left. $150 a piece shipped.** Unopened and all from the same lot.
  5. SheepShapeAK

    What gun would you want if the SHTF?

    Guns are icky. I would just need to shout words of encouragement if the SHTF and let them know my pronouns.
  6. SheepShapeAK

    338 Norma Reloading Data

    I’ve got some data for the 250 SBD2. 90.2grains of H1000 was giving me 2900fps in the 26” 5R 9.3 twist Bartlein I had on there. Haven’t done any loads for the 250 in my 1:8 twist yet.
  7. SheepShapeAK

    Badlands Precision Bullets thread - From BC to terminal ballistics

    375 EnABELR Peterson Case CCI #34 primer 24N41 - 135grains 365 grain SBD2 Got the 365 SBD2 pushing an average of 2975fps. Really need to get this rifle out to distance and see how it performs. Well, most importantly how I perform. Might take it down to one of our 1000 yard matches and shoot...
  8. SheepShapeAK

    7 PRC & Ramshot Magnum

    Also, what does the accuracy look like? I’d take the accuracy over top speed with a good bullet.
  9. SheepShapeAK

    7 PRC & Ramshot Magnum

    All my buddies are running H1000 or RL33 in their SAAMI 7PRC’s. There’s a gentleman on here running N570 with good results with the heavier bullets.
  10. SheepShapeAK

    338 Norma Reloading Data

    Have you tried and of the cutting edge bullets in your 338?
  11. SheepShapeAK

    Your going your hunt of a lifetome what are you hunting and what rifle are you using ? Mine is easy

    I’m spoiled. I live in Alaska. Hunt of a lifetime would probably be Marco Polo. I’d probably bring my 375 EnABELR since I wouldn’t be carrying my camp on my back.
  12. SheepShapeAK

    338 Norma Reloading Data

    Thanks!! I might just need to slow them back down. The accuracy was good down low. As soon as I started pushing them faster they opened up. Still shooting sub MOA with H1000, but I’d like to see 1/2 MOA at minimum. I went on VV’s site and did some math for the 338 Lapua and I was definitely...
  13. SheepShapeAK

    338 Norma Reloading Data

    Anyone got a starting point with N570 for the Badlands 275 SBD-2? Might even try some 24N41 in it.
  14. SheepShapeAK

    Badlands Precision Bullets thread - From BC to terminal ballistics

    Really depends on how much you order. Usually a couple of weeks, I would have imagined slower around the holidays.
Top